Do You Hook Up The Positive Or Negative First?
When you're reconnecting the battery, which side do you connect first?
15 Sep When charging a battery, it is important to connect the cables to the proper terminals. Connect the red cable to the positive terminal on the battery, and the black cable to the negative terminal. If you connect the red cable to the negative terminal and the black cable to the positive terminal, several problems. 14 Dec How to Hook up Jumper Cables. Your car battery could be too weak to start your car for a number of reasons: faulty alternator, leaving the lights on, cold weather, or simply an older battery that no longer holds sufficient charge. Whatever. 2 Oct Obviously, the first thing you need to do is locate the battery. Because that cable is connected to the car body and if you go for the positive one first and accidentally touch any metal part with the metallic tool you will As a rule of thumb, the positive cable is usually red, while the negative one is black.
If your experience with cars only implies driving and refilling the windshield liquid container, the very idea of touching the battery might send shivers down your spine.
How to Hook up Jumper Cables: 11 Steps (with Pictures) - wikiHow
Obviously, the first thing you need to do is locate the battery. Regardless of your car-related knowledge, you should have no trouble recognizing the acid-based device. Now, before you rush at the poor battery with your combination wrench or socket and ratchet, a few words of advice.
First of all, be sure to have the engine turned off. Secondly, check if there's any spillage from the battery. You wouldn't want to get any of the sulfuric acid on your face or hands, so always wear goggles and a pair of rubber gloves.
We didn't wear any because the battery was quite new and there was no danger, but you should, it's the safest way!
How to Jump Start a Car | The Art of Manliness
Also, if you notice any severe leakage and corrosion signs, it would be wise to turn to a professional to get the job done. Assuming that you've done all of the above, proceed to disconnect the cables. As previously mentioned, there are two cables: Always remove the negative one first.
Cartoon Hook-Ups: Red X and Blackfire
Because that cable is connected to the car body and if you go for http://hookupex.date/mus/which-star-sign-is-compatible-with-aries.php positive one first and accidentally touch any metal part with the metallic tool you will short circuit the battery not to mention causing a shower of sparks. With the negative cable disconnected, proceed to the positive one. As a rule of thumb, the positive cable is usually red, while the negative one is black.
Position the vehicles' to get the two batteries as close together as possible to allow room to work and for the jumper cable to reach. Never jump-start a frozen battery; it might explode. The red cable should be hooked up first. Jumper cables are the most popular tool used to jump start cars because they are inexpensive and easy to link. Now, begin attaching the jumper cables:
However, it's best to check your battery markings just to be on the safe side. You can now go ahead and remove the battery from its place.
Cryptocurrency like bitcoin is easy money for criminals. Should I turn the car off before removing the jumper cables? All text shared under a Creative Commons License. In addition to damaging the battery, connecting the wrong cable can damage the electrical components of anything that the battery is connected to.
Keep in mind that it's quite heavy and you wouldn't want to drop on your feet or on other people's feet. If you are installing a new battery, all you have to do with the old one is to take it to an authorized center for recycling. If, however, you are planning a thorough recharge process, you can take the opportunity and clean the terminals with a wire brush.
You can do the same with the cables themselves. After all of this is done, it's now time to put the new battery or the old, albeit recharged, battery back into place.
As you might or might not guess, you will have to wire everything in reverse order. So, after placing the battery in its place and securing it, first attach the positive cable and then the negative one.
A nice finishing touch would be to smear some special grease over the terminals to prevent future corrosion.
And you're all done. Now all you have to do is start the engine just to make sure everything is ok. In the old days, removing the battery for recharging purposes or for replacing was quite a regular task.
Kudos, Elon Reeve Musk! Who's Your Number One? VHS Battle of the 21st Century. Why Elon Musk's Insanity Matters.